ATEN CS1942 Manuel d'utilisateur télécharger pdf (Page 27)

4. Keyboard Port Operation

Auto Scanning

The CS1942 / CS1944’s Auto Scan feature automatically cycles the KVM

focus through the computer ports at regular intervals. This allows you to

monitor the computer activity without having to take the trouble of switching

from port to port manually. See the table below for details.

Note: 1. The n stands for the number of seconds that the CS1942 / CS1944

should dwell on a port before moving on to the next. Replace the n

with a number between 1 and 99 when entering this hotkey

combination.

2. While Auto Scan Mode is in effect, ordinary keyboard and mouse

functions are suspended – only Auto Scan Mode compliant

keystrokes and mouse clicks can be input. You must exit Auto Scan

Mode in order to regain normal control of the console.

3. Although the video focus switches from port to port, the audio and

USB focus do not switch. They stay at the port they were on when

Auto Scanning started.

4. To exit Auto Scan Mode, press the Esc key, or the Spacebar.

Hotkey Action

[Scroll Lock] [Scroll

Lock] [A] [Enter]

Invokes Auto Scan. The KVM focus cycles from port to port

at 5 second intervals. Five second intervals is the Default

setting.

[Scroll Lock] [Scroll

Lock] [A] [n] [Enter]

The KVM focus cycles from port to port at n second intervals.

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 46 47

Pas de commentaire

ATEN CS1942 Manuel d'utilisateur Page 27