ATEN CS1942 Manuel d'utilisateur télécharger pdf (Page 25)

Chapter 4

Keyboard Port Operation

The CS1942 / CS1944 provides an extensive, easy-to-use, hotkey function that

makes it convenient to control and configure your KVM installation from the

keyboard. Hotkeys provide asynchronous (independent) switching of the

KVM, USB hub and audio focus. If you wish, you can give one computer the

KVM console focus, another the USB hub focus and the other(s) the audio

focus.

Port Switching

All port switches begin with tapping the Scroll Lock key twice. The tables

below describe the actions that each combination performs.

Note: If using the Scroll Lock key conflicts with other programs running on

the computer, the Ctrl key can be used, instead. See Alternate Port

Switching Keys, page 21, for details.

Cycling Through the Ports

Hotkey Action

[Scroll Lock] [Scroll Lock]

[Enter]

Brings the KVM, USB hub, and audio focus from the

port that currently has the KVM focus to the next port on

the installation (1 to 2; 2 to 1 for the CS1942: 1 to 2; 2 to

3; 3 to 4; 4 to 1 for the CS1944).

[Scroll Lock] [Scroll Lock]

[K] [Enter]

Brings only the KVM focus from the port that currently

has it to the next port on the installation. The USB and

audio focus remain where they are.

[Scroll Lock] [Scroll Lock]

[U] [Enter]

Brings only the USB hub focus from the port that

currently has it to the next port on the installation. The

KVM and audio focus remain where they are.

[Scroll Lock] [Scroll Lock]

[S] [Enter]

Brings only the audio focus from the port that currently

has it to the next port on the installation. The KVM and

USB hub focus remain where they are.

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 46 47

Pas de commentaire

ATEN CS1942 Manuel d'utilisateur Page 25