ATEN CS-1732 Manuel d'utilisateur télécharger pdf (Page 23)

Alternate Port Switching Keys

The port switching activation keys can be changed from tapping the Scroll Lock key

twice ([Scroll Lock] [Scroll Lock]) to tapping the Ctrl key twice. To change the port

switching activation keys, do the following:

1. Invoke HSM (see p. 16)

Press and release the T key

Note: This procedure is a toggle between the two methods. To revert back to the

original [Scroll Lock] [Scroll Lock] method, invoke HSM, then press and release

the T key again.

Keyboard Operating Platform

The CS-1732A / CS-1734A‘s default port configuration is for a PC Compatible keyboard

operating platform. If your requirements call for different port settings (you have a Mac or

Sun attached to a port, e.g.), you can change a port’s keyboard operating platform

configuration as follows:

1. Bring the KVM focus to the port you want to set.

2. Invoke HSM (see p. 16)

3. Press and release the appropriate Function key (see table). After completing a setting,

you automatically exit HSM.

Function Key Operation

[F1] Sets the PC Compatible keyboard operating platform.

[F2] Sets the Mac keyboard operating platform.

[F3] Sets the Sun keyboard operating platform.*

* The first time that the Sun system runs from a port, you must configure its port for the

Sun keyboard operating platform before you turn the system on, or else the Sun

system will not start.

2005-12-21

Hotkey Operation

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 36 37

Pas de commentaire

ATEN CS-1732 Manuel d'utilisateur Page 23