ATEN VE809 Manuel d'utilisateur télécharger pdf (Page 20)

VE809 User Manual

EDID Management

EDID (Extended Display Identification Data) is the data provided by digital

displays to indicate their capabilities to video sources.

The HDMI Wireless Extender distributes HDMI signals from your video

source to two HDMI displays. In order to deliver the best audio and video

formats supported by both TVs, the VE809 reads the EDID information from

both displays and determines the best “common” video resolution and audio

format to send to the video source to program EDID on the device (i.e. Blu-ray

players auto resolution setting).

In order to provide the best “common” output resolution, for both displays, the

VE809 reads the EDID whenever a TV is plugged in, unplugged, or turned on/

off. It is normal to see both TVs flash for a couple seconds when they are

powered on, or when switching source devices, this allows the EDID to adjust

to the best “common” resolution for all devices to use.

To get the best resolution for a (single) specific TV (i.e. 1080p 3D), you can

manually change the resolution from your video source or unplug the lower

resolution EDID device, then power cycle both VE809 units and connected

devices. For certain 3D Blu-ray players, you may need to eject and re-insert the

3D Blu-ray disk. If your video source does not output a best “common”

resolution, one of your TVs may not display any content or it might play audio

only. Please refer to your devices’ user manual for further information if this

issue appears. Below “Loop-through” refers to the locally connected HDTV.

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 26 27

Pas de commentaire

ATEN VE809 Manuel d'utilisateur Page 20