ATEN VE809 Manuel d'utilisateur télécharger pdf (Page 14)

Chapter 2

Hardware Setup

To install the VE809 HDMI Wireless Extender, refer to the installation

diagrams below as you preform the following steps:

VE809T - Transmitter Installation

1. Use an HDMI cable to connect the HDMI source device(s) to the HDMI

input port(s) on the rear of the VE809T.

2. Use an HDMI cable to connect the local HDMI video display (HDTV) to

the HDMI output port on the rear of the VE809T.

3. Plug the provided power adapter into an appropriate power source; plug

the power adapter cable into the power jack on the VE809T.

4. Connect the IR Blaster cable included with your package into the IR Out

port (see IR Blaster Installation, page 8). (Optional)

1. Important safety information regarding the placement of this

device is provided on page 14. Please review it before

proceeding.

2. Make sure that the power to all devices connected to the

installation are turned off.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 26 27

Pas de commentaire

ATEN VE809 Manuel d'utilisateur Page 14