ATEN KL9108 Manuel d'utilisateur télécharger pdf (Page 150)

KL9108 / KL9116 User Manual

138

Administrator Login Failure

If you are unable to perform an Administrator login (because the Username and

Password information has become corrupted, or you have forgotten it, for

example), there is a procedure you can use to clear the login information.

Note: Performing this procedure also returns all settings to their defaults.

To clear the login information (and return all settings to their defaults), do the

following:

1. Power off the KL9108 / KL9116 and remove the power cord from the

power socket.

2. Remove the cover from the KL9108 / KL9116.

3. Using a jumper cap, short the jumper labeled J18 on the mainboard.

4. Replace the power cord and power on the KL9108 / KL9116.

5. When the front panel LEDs flash, power off the KL9108 / KL9116 and

remove the power cord from the power socket again.

6. Remove the jumper cap from the jumper.

7. Replace the cover on the switch. Replace the power cord and power on the

KVM switch.

8. After powering on the unit, you can use the default Username and

Password (see page 31) to log in.

kl910816.book Page 138 Tuesday, July 3, 2007 10:57 AM

1 2 ... 145 146 147 148 149 150 151 152 153 154 155 ... 159 160

Pas de commentaire

ATEN KL9108 Manuel d'utilisateur Page 150